This is a Digital Download where you will get the needed files to 3D Print And Modify as you like.
The goal while developing this Flash Carousel was to make it as inexpensive as possible, so all that is needed is 4 – 3D printed parts (combined weight of 141 Gram)
1 pc. of Ø16mm hard electrical installation tube, used in houses to run cables. This part can most likely be found in the local hardware store for under 2$
Finally 4 pc. of M5x12 countersunk bolts is used to screw the lid on. (you can cut the M5 thread directly in the base)
To give the base some weight, some stones or sand can be placed inside before screwing the lid on.
